Contact customer service

Your research

Welcome

You are:

A professional
Cancel Validate
A particular
Cancel Validate
Didactic
Didactic
English
  • Français
  • Español
English
  • Français
  • Español
< RETOUR

EXAMINATION GLOVES NON STERILE LATEX 240MM POWDER-FREE MEDICAL DEVICE PPE CAT III- BOX OF 100 UNITS

Reference : GLNP
size 

  • The Polysem Medical non sterile latex examination gloves meet the technical specifications for a latex examination glove.
  • These gloves are rated as both a Class I medical device and Category III type C Personal Protective Equipment.
  • Low protein content

Add to my quote request Buy
Choose a reference
Description
Description

Polysem Medical examination gloves are indicated when the use of a non-sterile ambidextrous glove is required.

In particular, they can be used in the different units when a non-sterile glove is required.

Cuff size: 240 mm

Colour: Cream

Technical
information
Technical
information

Indications 
All procedures of short duration requiring an examination glove.

Used materials 
Raw material : Natural rubber latex -> 75%. Bulking agent : Calcium carbonate Vulcanising agent: Sulphur Vulcanisation accelerators: ZDEC, ZDBC Cross-linking additive: Zinc oxide Release agent: MaxCo A160 Pigment : Titanium dioxide Antioxidant

Labeling 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

medical device 

  • MD class : I
  • MD notified body : NA
  • EU directive/regulation : 2017/745
  • annexe : IV

EPI 

  • european directive(s) - regulation(s) : 2016/425
  • IPE category : III
  • IPE notified body : 2777

sterile 

  • sterile : no

conformity 

  • Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
  • Medical gloves for single use - Part 2: Requirements and testing for physical properties
  • Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
  • Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
  • Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage
  • Determination of material resistance to permation by chemicals - Part 1: permeation by liquid chemical under conditions of continuous contact
  • Protective gloves against chemicals and micro-organisms - Part 2 : determination of resistance to penetration
  • Protective gloves against chemicals and micro-organisms - Part 4 : determination of resistance to degradation by chemicals
  • Protective gloves - General requirements and test methods
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for chemical risks.
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for micro-organisms risks.

economic operator 

  • MANUFACTURER : DIDACTIC / 216 Rue Roland Moreno - 76210 Saint-Jean-de-

Use
Use

Choose a reference
Request the technical sheet

Polysem Medical examination gloves are indicated when the use of a non-sterile ambidextrous glove is required.

In particular, they can be used in the different units when a non-sterile glove is required.

Cuff size: 240 mm

Colour: Cream

Indications 
All procedures of short duration requiring an examination glove.

Used materials 
Raw material : Natural rubber latex -> 75%. Bulking agent : Calcium carbonate Vulcanising agent: Sulphur Vulcanisation accelerators: ZDEC, ZDBC Cross-linking additive: Zinc oxide Release agent: MaxCo A160 Pigment : Titanium dioxide Antioxidant

Labeling 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

medical device 

  • MD class : I
  • MD notified body : NA
  • EU directive/regulation : 2017/745
  • annexe : IV

EPI 

  • european directive(s) - regulation(s) : 2016/425
  • IPE category : III
  • IPE notified body : 2777

sterile 

  • sterile : no

conformity 

  • Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
  • Medical gloves for single use - Part 2: Requirements and testing for physical properties
  • Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
  • Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
  • Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage
  • Determination of material resistance to permation by chemicals - Part 1: permeation by liquid chemical under conditions of continuous contact
  • Protective gloves against chemicals and micro-organisms - Part 2 : determination of resistance to penetration
  • Protective gloves against chemicals and micro-organisms - Part 4 : determination of resistance to degradation by chemicals
  • Protective gloves - General requirements and test methods
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for chemical risks.
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for micro-organisms risks.

economic operator 

  • MANUFACTURER : DIDACTIC / 216 Rue Roland Moreno - 76210 Saint-Jean-de-

Video(s)

Request for technical documentation

  • Didactic formally undertakes not to sell, rent or exchange any personal information. In application of articles 39 and following of the law of January 6, 1978 modified relating to data processing and freedoms (CNIL), you have the right to access, delete and rectify information concerning related to you.