MALE STOPPER
You are:
Male obturators with injection site in Polycarbonate (PC) / Synthetic Polyisoprene.
Ergonomics: Simple and efficient installation.
Made in China.
Contact with 0.5% or 2% Chlorhexidine in 70° Isopropyl alcohol, without evaporation time, and while the luer lock is connected, therefore under physical stress, presents a significant risk of cracking of the luer lock, and should be avoided as much as possible.
In accordance with the recommendations of the SF2H (2019) and Didactic's disinfection protocol, it is always preferable to disinfect the connectors (when necessary) with 70° ethyl alcohol followed by a mandatory drying time of 15 secondes at least before connecting. 70° ethyl alcohol is just as effective disinfecting inert materials and then reduces the risk of altering plastic materials.
Indications
This device is an infusion set or an infusion extension accessory, and allows for injection or withdrawal using a needle via the latex-free synthetic polyisoprene port.
Dispose of in accordance with the regulations in force in the Member State.
Used materials
STOPPER: in Polycarbonate / Synthetic polyisoprene.
Labeling
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable
medical device
sterile
conformity
Transport conditions
Protected from light and humidity
| Conditioning | Parts quantities | Dimensions in cm | Weight in kg | Ean 13 of conditioning |
| UNIT | 1 | 5 x 2 x 1 | 06972620110459 | |
| BOX | 200 | 16 x 14 x 18 | 16972620110456 | |
| CASE | 4000 | 72 x 34 x 38 | 26972620110453 |
