You are:
The INFINEED 1-way infusion device lt;Gravity 5.5 lt; sterile, DEHP free, BPA free has been designed to minimise its environmental impact, using only raw materials that are free from endocrine disruptors (elimination of components, including DEHP or BPA). Infuser with: Perforator: Two-channel with grip wings Air intake: Delivered closed for immediate use on a 0.2µ filter bag. Chamber: Flexible and transparent, Calibrated at 20 drops = 1ml ± 0.1ml, 15µ particle filter. Flow regulator: Accurate and reliable, linear flow regulator. Filter: 0.2µm flat filter with very low polyethersulfone protein binding (can be used with taxanes, etoposide, monoclonal antibodies in oncology). Tubing: PVC (DINCH) designed for comfort, optimal flow adjustment consistency and to prevent kinks. End fitting: Mobile Luer Lock. End stopper: 0.8 µm purge filter with antibacterial membrane. Length: 150 cm + 30 cm Residual volume: 16.5 ml Made in China.
Contact with 0.5% or 2% Chlorhexidine in 70° Isopropyl alcohol, without
evaporation time, and while the luer lock is connected, therefore under
physical stress, presents a significant risk of cracking of the luer
lock, and should be avoided as much as possible.
In
accordance with the recommendations of the SF2H (2019), disinfecting the
connectors (when necessary) with 70° ethyl alcohol is always
preferable, as it is just as effective in disinfecting inert materials
and there is much less risk of altering plastic materials.
Indications
This device enables the parenteral administration by gravity of injectable preparations: parenteral drugs, solutions and nutrition, requiring administration filtered at 0.2 µm (can be used with taxanes, etoposide, monoclonal antibodies in oncology).
Do not use for pressure infusion or transfusion.
For peripheral lines, the infusion line can remain in place for a maximum of 96 hours (i.e. the maximum time the peripheral catheter can be in place).
For central lines, the infusion line must be changed at least every 72 hours (or according to the institution's validated protocol).
Dispose according to the state member regulation.
Labeling
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable
medical device
sterile
conformity
| Conditioning | Parts quantities | Dimensions in cm | Weight in kg | Ean 13 of conditioning |
| UNIT | 1 | 0.040 | 3661809032769 | |
| BOX | 75 | 27 x 39 x 29 | 3.160 | 3661809032776 |
| CASE | 300 | 57 x 60 x 40 | 13.400 | 3661809032783 |