STERILE INFUSION SET PVC DEHP-FREE BPA-FREE 3X4.1 1 WAY GRAVITY 5.5 MOBILE LUER LOCK VENT FILTER 160 CM
You are:
The sterile INFINEED 1-way infuser with photoprotective UV filter, Y site, DEHP-free, BPA-free has been designed to minimize its environmental impact, using exclusively raw materials free of endocrine disruptors (elimination of components containing DEHP or BPA).
The Y site allows for bypass administration of bolus medications using a syringe and needle.
Infuser with:
Dual Channel Perforator
Air intake: Delivered closed for immediate pocket use - 0.2µ filter.
Chamber: Flexible and translucent - Calibrated at 20 drops = 1ml ± 0.1ml - 15µ anti-particle filter.
Caster: Precise and reliable, linear flow regulator.
Tubing: Translucent yellow DINCH PVC designed for comfort and optimal adjustment regularity and to avoid kinking.
Terminal tip: Mobile Luer Lock
Terminal cap: Equipped with a purge filter with anti-bacterial membrane.
Contact with 0.5% or 2% Chlorhexidine in 70° Isopropyl alcohol, without
evaporation time, and while the luer lock is connected, therefore under
physical stress, presents a significant risk of cracking of the luer
lock, and should be avoided as much as possible.
In
accordance with the recommendations of the SF2H (2019), disinfecting the
connectors (when necessary) with 70° ethyl alcohol is always
preferable, as it is just as effective in disinfecting inert materials
and there is much less risk of altering plastic materials.
Indications
This device allows the administration by gravity of parenteral injectable preparations: drugs, solutions, parenteral nutrition, photosensitive drugs.
On the peripheral route, the infusion line can remain in place for a maximum of 96 hours (i.e. the maximum duration of installation of the peripheral catheter).
Used materials
lt;Drip chamber: PE, PVC, Glass fiber, ABS, Nylon
Tube: PVC
Roller clamp: ABS
Y site: ABS rubber
Male Luer Lock: ABS
Cap: PE lt;
Labeling
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable
medical device
sterile
conformity
Transport conditions
Protect from light and humidity and store at a temperature between 5°C and 20°C.
| Conditioning | Parts quantities | Dimensions in cm | Weight in kg | Ean 13 of conditioning |
| UNIT | 1 | 23 x 13 x 0 | 06972620110473 | |
| BAG | 25 | |||
| CASE | 200 | 46 x 52 x 42 | 16972620110470 |
