1-WAY INFUSER STERILE PVC UV FILTER PHOTOPROTECTOR DEHP-FREE BPA-FREE 3X4.1 SITE Y LUER LOCK MOBILE PURGE FILTER 150+30CM

Reference : PERPPYFJ02

  • Without Bisphenol A and without DEHP (<0.1% m/m.)
  • Designed to minimize the environmental footprint by reducing the mass of plastic materials.
  • Packaging developed with users to provide very good readability of the main information needed immediately.

Description

The sterile INFINEED 1-way infuser with photoprotective UV filter, Y site, DEHP-free, BPA-free has been designed to minimize its environmental impact, using exclusively raw materials free of endocrine disruptors (elimination of components containing DEHP or BPA).

The Y site allows for bypass administration of bolus medications using a syringe and needle.

Infuser with:

Dual Channel Perforator

Air intake: Delivered closed for immediate pocket use - 0.2µ filter.

Chamber: Flexible and translucent - Calibrated at 20 drops = 1ml ± 0.1ml - 15µ anti-particle filter.

Caster: Precise and reliable, linear flow regulator.

Tubing: Translucent yellow DINCH PVC designed for comfort and optimal adjustment regularity and to avoid kinking.

Terminal tip: Mobile Luer Lock

Terminal cap: Equipped with a purge filter with anti-bacterial membrane.

Technical
information

Indications 
This device allows the administration by gravity of parenteral injectable preparations: drugs, solutions, parenteral nutrition, photosensitive drugs. On the peripheral route, the infusion line can remain in place for a maximum of 96 hours (i.e. the maximum duration of installation of the peripheral catheter).

Used materials 
"Drip chamber: PE, PVC, Glass fiber, ABS, Nylon Tube: PVC Roller clamp: ABS Y site: ABS rubber Male Luer Lock: ABS Cap: PE"

Labeling 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

medical device 

  • MD class : IIa
  • MD notified body : 0197
  • EU directive/regulation : DIRECTIVE 93/42/CEE
  • annexe : V

sterile 

  • sterile : yes
  • sterilization method : ethylene oxide

conformity 

  • Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications
  • Infusion equipment for medical use - Part 4 : Infusion sets for single use, gravity feed.

Logistics
information

Transport conditions 

Protected from light and humidity

Conditioning Parts quantities Dimensions in cm Weight in kg Ean 13 of conditioning
UNIT 1 06972620110473
CASE 200 46 x 52 x 42 16972620110470

The sterile INFINEED 1-way infuser with photoprotective UV filter, Y site, DEHP-free, BPA-free has been designed to minimize its environmental impact, using exclusively raw materials free of endocrine disruptors (elimination of components containing DEHP or BPA).

The Y site allows for bypass administration of bolus medications using a syringe and needle.

Infuser with:

Dual Channel Perforator

Air intake: Delivered closed for immediate pocket use - 0.2µ filter.

Chamber: Flexible and translucent - Calibrated at 20 drops = 1ml ± 0.1ml - 15µ anti-particle filter.

Caster: Precise and reliable, linear flow regulator.

Tubing: Translucent yellow DINCH PVC designed for comfort and optimal adjustment regularity and to avoid kinking.

Terminal tip: Mobile Luer Lock

Terminal cap: Equipped with a purge filter with anti-bacterial membrane.

Indications 
This device allows the administration by gravity of parenteral injectable preparations: drugs, solutions, parenteral nutrition, photosensitive drugs. On the peripheral route, the infusion line can remain in place for a maximum of 96 hours (i.e. the maximum duration of installation of the peripheral catheter).

Used materials 
"Drip chamber: PE, PVC, Glass fiber, ABS, Nylon Tube: PVC Roller clamp: ABS Y site: ABS rubber Male Luer Lock: ABS Cap: PE"

Labeling 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

medical device 

  • MD class : IIa
  • MD notified body : 0197
  • EU directive/regulation : DIRECTIVE 93/42/CEE
  • annexe : V

sterile 

  • sterile : yes
  • sterilization method : ethylene oxide

conformity 

  • Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications
  • Infusion equipment for medical use - Part 4 : Infusion sets for single use, gravity feed.

Transport conditions 

Protected from light and humidity

Conditioning Parts quantities Dimensions in cm Weight in kg Ean 13 of conditioning
UNIT 1 06972620110473
CASE 200 46 x 52 x 42 16972620110470

Associated products

STERILE INFUSION SET PVC DEHP-FREE BPA-FREE 3X4.1 1 WAY GRAVITY 5.5 MOBILE LUER LOCK VENT FILTER 160 CM
STERILE INFUSION SET PVC DEHP-FREE BPA-FREE 3X4.1 1 WAY GRAVITY 5.5 FIXED LUER LOCK VENT FILTER 170 CM
1-WAY INFUSER SUICIDE FLOW PERFORMANCE STAGED ROTARY FLOW REGULATOR
1-WAY INFUSER STERILE PVC UV FILTER PHOTOPROTECTOR DEHP-FREE BPA-FREE 3X4.1 LUER LOCK MOBILE PURGE FILTER 180CM

Associated products

STERILE INFUSION SET PVC DEHP-FREE BPA-FREE 3X4.1 1 WAY GRAVITY 5.5 MOBILE LUER LOCK VENT FILTER 160 CM
STERILE INFUSION SET PVC DEHP-FREE BPA-FREE 3X4.1 1 WAY GRAVITY 5.5 FIXED LUER LOCK VENT FILTER 170 CM
1-WAY INFUSER SUICIDE FLOW PERFORMANCE STAGED ROTARY FLOW REGULATOR
1-WAY INFUSER STERILE PVC UV FILTER PHOTOPROTECTOR DEHP-FREE BPA-FREE 3X4.1 LUER LOCK MOBILE PURGE FILTER 180CM

Request for technical documentation

  • Didactic formally undertakes not to sell, rent or exchange any personal information. In application of articles 39 and following of the law of January 6, 1978 modified relating to data processing and freedoms (CNIL), you have the right to access, delete and rectify information concerning related to you.