LINEAR EXTENSION PVC DEHP-FREE BPA-FREE 2.5X4.1MM MOBILE MALE FEMALE LUER LOCK
You are:
The INFINEED lt;precision plus lt; DEHP free, BPA free PVC extension has been designed to minimise its environmental impact, using only raw materials that are free from endocrine disruptors (elimination of components, including DEHP or BPA). The extension has been tested at pressures well above those recommended for gravity infusion; laboratory tests have shown a pressure resistance of approximately 10 bar.
Extension with:
Tubing: PVC (DINCH) designed for comfort, optimal flow adjustment consistency and to prevent kinks. Diameter: 2.5 x 4.1mm
End cap: Fixed Luer Lock
End stopper: Polypropylene cap
2 bar pressure resistance according to the claim of compliance with reference standard NF EN ISO 8536-9.
Contact with 0.5% or 2% Chlorhexidine in 70° Isopropyl alcohol, without
evaporation time, and while the luer lock is connected, therefore under
physical stress, presents a significant risk of cracking of the luer
lock, and should be avoided as much as possible.
In
accordance with the recommendations of the SF2H (2019), disinfecting the
connectors (when necessary) with 70° ethyl alcohol is always
preferable, as it is just as effective in disinfecting inert materials
and there is much less risk of altering plastic materials.
Indications
This medical device is intended for the parenteral administration of injectable preparations (drugs, nutrition) by gravity.
Used materials
PVC DINCH (DEHP<0.1%(m/>)): Tubing - Polypropylene: Protective cap - Polyethylene: End cap - Acrylonitrile Butadiene Styrene: Fixed male Luer Lock, fixed female Luer lock
Labeling
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable
medical device
sterile
conformity
economic operator